- Exhibition Stands
- Roll up Banner Stands
- Clear Roller Banner Free-Standing Screen
Clear Roller Banner Free-Standing Screen
From
£45.00
Clear Roller Banner Free-Standing Screen
From
£45.00
- Ideal as protective screen for social distancing.
- Choose from 800mm or 1000mm widths. All banners are 2m tall.
- 1 year guarantee on the base.
- Lightweight and portable
- Wipe-friendly material.
- Can be personalised with your own logo or messaging. If you choose the personalisation option, please e-mail your logo file to [email protected] following your purchase.
The clear protective roller banners can be used to create safe social distancing barriers in restaurants, offices, hairdressers, waiting rooms or anywhere there is a need for protection of staff and customers.
Use as stand-alone unit in-between chairs, desks or tables, or combine multiple units placing them next to each other to create larger protective barriers.
Can be personalised with your own logo or messaging.
Building your stand:
- Take out the stand from the zip carry bag. Remove the pole elements from the slot in the base. The pole sections are spring loaded. Assemble into one piece by pulling and inserting each piece into the other.
- Turn the single foot piece on the bottom of the base at right angles to the base to form the foot.
- Insert one end of the pole (either end) into the round slot at one side of the top of the base.
- Position yourself behind the stand. Start pulling up the graphic, which will be just visible sticking out of the top of the base. Holding the pole, tilt the unit gently backwards until you can reach the top of the pole with the top of the graphic. Carefully insert the round plastic grommet into the top of the pole. DO NOT LET GO OF THE GRAPHIC.
- Your banner stand is ready for use.
Taking down your stand:
- Position yourself behind the stand. Holding the pole, tilt the stand backwards gently and pull up the grommet and strip at the top of the pole to release.
- Let the graphic down very slowly into the base taking care not to let go.
- Unassemble the poles by pulling out and bending into three.
- Insert poles back into base.
- Pack unit into zip carry case.