Help centre

Contact

login

Can't find what you need?

01723 363 732

AdversetDisplay

Floor Graphics, Stickers & Decals

From

£35.00

per sq. mtr

Floor Graphics, Stickers & Decals

From

£35.00

per sq. mtr

View product options
  • Cut to any shape, or produced as a standard square or rectangle
  • Fully Health & Safety compliant with anti-skid laminate
  • Easy to fit indoor floor stickers and outdoor floor graphics
  • Ideal for temporary sales messages or promotions

Indoor Floor Stickers

Promote your business, retail or office floor with your brand, a sales message or just an attention-grabbing image, using a vinyl printed floor stickers. Our floor graphics are also useful for floor-based wayfinding signage.

Printed and produced with an anti-skid laminate, floor graphic displays are ideal for any indoor application, such as retail, office, public areas, exhibitions or attractions.
Indoor floor vinyl adhesive is not as aggressive as the outdoor product so carries a guarantee of 3 months from the date of printing.

Outdoor Floor Graphics

Ideal for external advertising campaigns, our outdoor vinyl product adheres to any pedestrian traffic surface such as concrete, pavements, car parks etc. All our outdoor pavement graphics use an aggressive clear permanent adhesive and are produced with an anti-skid laminate offering a satin-sand structured finish.

*R11 rated laminate is guaranteed for upto 3 months depending on footfall.

*R12 rated laminate is guaranteed for upto 6 months depending on footfall.

 

Fitting for both indoor and outdoor products is straightforward and can be undertaken with a little care, following the instructions in our ‘fitting’ tab below.

Please use the form to request samples of our Wall graphic vinyl. Send in an image of your choice and we will print a small area as a sample. You can e-mail your image for the sample here.

Fitting Your Floor Decals

Printed floor graphics will fit to most smooth floor surfaces such as wood and laminate. Fitting is simple, providing you take your time, as follows. Wet application is advised for larger graphics:

  • Establish the position of your floor decal graphic and tape in place with a couple of pieces of masking tape.
  • ‘DRY’ APPLICATION: Bend back the graphic, remove part of the backing sheet, apply a small area of the graphic to the floor and rub down with a soft cloth. Gradually release the backing paper and work across the graphic.
  • ‘WET’ APPLICATION: Turn the graphic upside down so that the image is facing the floor and gradually peel back the backing paper whilst spraying with a mixture of water and a few drops of washing up liquid. Position the graphic on the floor and work from edge to edge with a squeegee. Dry the graphic with a soft cloth.

Pavement Graphics Fitting

Easy to fit, all our outdoor vinyls come with a comprehensive fitting guide. Spec. sheets are available for both floor decal products regarding slip resistance guarantees and durability factors.

 

Floor Graphics, Stickers & Decals

From

£35.00

per sq. mtr

Floor Graphics, Stickers & Decals

From

£35.00

per sq. mtr

View product options
  • Contravision is made to measure to fit any size
  • Use previously unused window spaces as promotional spaces without obstructing vision from the inside thanks to clever one way window film technology
  • Increase privacy by restricting the vision from the exterior
  • Very easy to fit
  • Very popular with theatre venues NOTE: Maximum size in one piece = 1.5 metres (w) x any length up to 50 metres. Please set up artwork with 5mm of bleed minimum with crop marks.

Contravision Vinyl For One Way Window Promotions

Contravision allows you to display and promote your show or product on the exterior of your window, whilst providing a clear view from the interior! The unique honeycomb pattern in the surface of Contravision vinyl allows you to have 100% one way vision from the inside of your building. Meanwhile full colour graphic are displayed on the exterior to promote your branding and key messages.
 
Please Note: Artwork should be set up with 5mm of bleed minimum with crop marks.
Please use the form to request printed samples of our Contravision material.

Fitting Contravision vinyl one way film is very straight forward.

1. Mix water with a drop of Fairy Liquid or baby shampoo inside a spray bottle.

2. Spray the window taking care to wet the full surface.

3. Place the contravision graphic on the window FACE ON so that the design is AGAINST the window.

4. Remove the backing carefully, spraying the back of the graphic vinyl as you go.

5. Turn the vinyl around, place in the desired position on the window (the water will allow you to slide the vinyl around for a few minutes to achieve your position.

6. Squeegee out the excess water with a rubber squeegee. Take care to remove all the moisture from each corner allowing the corners to adhere properly.

7. Wipe down with a dry cloth and leave to dry for a few hours before touching.

 
Scroll to Top