- Exhibition Stands
- Pop Up Stands
- 3×4 Pop Up Exhibition Stand
3×4 Pop Up Exhibition Stand
From
£649.00
3×4 Pop Up Exhibition Stand
- 2225mm(h), 3070mm(w), 960mm(d)
- 4 panel system, complete with stylish curved end panels
- Includes full set of durable, heavy weight, 300 micron anti-scratch laminated display graphics
- Includes luxury wheeled hard-shell carry case which converts into a counter* with wooden beech top
- Includes 2 x PS1000 floodlights
-
Pop-up design with magnetic fastening graphics for quick assembly
* Optional graphic available for counter.
3x4 Pop Up Stand
The 3×4 pop up exhibition stand is the second largest available at Adverset Display, and comes in the form of our 4-Panel Flexi pop up stand. 3×4 exhibition stand printing is available, with the heavyweight graphics attaching to the reverse of the frame with magnets.
As with all our pop up stands, the 3×4 exhibition stand comes complete with floodlights and a luxury hard-shell carry case with wheels for easy transportation. The 3×4 pop up stand is perfect for promoting your brand and products at exhibitions, in foyers and reception areas.
A similar product is our extra large fabric exhibition stand, a versatile and cost effective display solution.Â
Click Here to Order Replacement Graphics for your Exhibition Stand
Â
Whilst we can’t send you a sample of an actual stand unit, we would be happy to supply material swatches for the graphic panels, if useful.
Erecting your pop-up stand is very straightforward. Here are a few easy steps:
1. Take out the main frame and pull up until it clicks into place (similar action to a clothes horse).
2. Take out the bag of magnetic strip bars and slot into the sections of the frame. They will click into place with ease.
3. Make sure you have an area of floor to work in. Locate the relevant graphic, which will be a corner piece. This will already attached to a hanger and will be fitted with magnetic strips on the reverse. Hang from the two slots located at the top of the corner section and let the graphic bend naturally. The magnets on the reverse of the graphic should snap into position. Repeat this for the centre panels which will be straight and then finish with the other corner piece.
4. Adjust the graphics if required by moving slightly on the hangers. There should be a small amount of adjustment available.
5. Attach the lights (see file on this under our download tab).
6. Fit the wooden counter top onto the carry case to convert into a counter. Attach the graphic around the counter (if applicable), secure at the back with the double sided velcro which will already be fitted.
You’re ready to go!
Reverse the procedure to dismantle, taking care to roll the graphics up carefully – always roll with magnets on the inside, image to the outside.